It is very easy to manufacture its own custom shelves for your accommodation. It’s a little retro style or vintage-like the models that were popular many years ago, but now the style is returned. The shelves consists of only two opposite brackets mounted on a wooden board. This is so simple that anyone can produce such shelves. One can find several exciting projects on boligblog.com, and here you can also see the full instructions that even low shelves for your accommodation .
Shelves with suspension instead of brackets are super trendy and chic, and they are available in many cool versions with, among other leather straps or steel supports. I have made my own fat shelves, hanging in tree on a super cheap way. They are actually very simple to make, and I think they were really fine. My hanging on my bathroom, which probably can be glimpsed, but they could also be super cool in the rest of the dwelling.
I made shelves in two paragraphs. EKBY Tryggve shelves in size 28 × 119 cm, 39 kr., And four paragraphs. EKBY Valter brackets 28 cm, 20 kr. From Ikea. Both shelves and brackets are in untreated wood, that way I could even save shelf in the objectives and paint them in the color I wanted. The shelves have therefore cost 79 kr. Piece! plus a little elbow grease and a dollop of paint :). As you might have lurked are the brackets really just upside on the shelf, with some modifications.
How to do it:
First you cut the brackets to. The little piece that sticks out must be sawn off. It’s super easy and quickly done. Replace them if necessary. stuck with a cramp before you cut. The shelves were little demand for it I had to use them so I sawed them measuring 80 cm. You can easily save the two shelf above simultaneously. Place them on top of each other and secure them with a few clamps. Then the shelves of equal length. Be sure to hold back on the shelves the last few centimeters so they do not break the last piece. Sand splinters away with sandpaper, so that the ends are soft and fine. I have painted my shelves in a pads pink color to break a little with the white, and so is the color also good for the rough and unpainted brackets, which almost has a leather-like look. Shelving Holder is bolted to the back of the shelf ends, with one screw in the outer drilled hole and one screw underneath the shelf and up. I have placed the shelves just below each other so that they function as a unit and not flaunt too much.